Anyang LCD splicing screen manufacturers offer 46-inch 55-inch LCD splicing screen, parameters, programs, pictures, HD, highlight, Model Contact: Mr. Liu 18688994974 dust visible area of ??the display on the Touch Screen Kiosk not have any effect, However, if the touch screen overlay reflective stripes around too much dust, the touch screen will gradually lose touch functionality. Then, clean off the dust around the touch screen can be restored to normal. Can be put on a business card or bank card through the thin fabric of the cabinet face frame gap with the touch screen wipe dust. Typically, the state of the touch control box lights what? Normal working hours, the boot two seconds after three seconds after the light goes out, after the touch when finished booting long bright, no touch off. For other states, please check your hardware connections. Why do I sometimes find the mouse has four sides of the monitor at a point? Happens mostly because of the touch display case or cabinet area is too tight casing pressure, equivalent to a certain point has been touched. If the cabinet enclosures suppress touch area, you can monitor the cabinet and slightly adjusting the distance between the screen bigger; suppress the display case if the touch area, you can also try to unscrew the monitor enclosure that. Why sometimes touch points with the mouse arrow biased? Ultra-narrow contrast stitching simple parameterization series: 46-inch LCD splicing screen, cold cathode backlight, brightness 450 (700) cd/m2, resolution 1366X768, Samsung imported LCD screen, splicing gap 6.7MM 46-inch LCD splicing screen, LED backlight, brightness 450 (700) cd/m2, resolution 1920X1080, Samsung imported LCD screen, splicing gap 5.5MM 55-inch LCD splicing screen, LED backlight, brightness 500 (700 ) cd/m2, resolution 1920X1080, imported from South Korea's LG LCD screen, patchwork gap 5.3MM 55-inch LCD splicing screen, LED backlight, brightness 450 (700) cd/m2, resolution 1920X1080, Samsung imported LCD screen, patchwork gap 5.3MM Product Specification are welcome to inquire: 18688994974 www.dwypj.com new high-definition 46-inch LCD splicing screen: Panel Type South Korea imported brand new Samsung 46-inch LCD DID mosaic patchwork 5.5MM Backlight: LED backlight panel size : 46 inches Resolution: 1920X1080 ratio: 16:9 (width: height) Pixel arrangement: RGB Pixel Pitch: 0.530257X0.53025mm (W × H) Weight: 15KG Surface: Matte (HAZE44%) Display Area: 1018.08 X572.67mm (W × H) Outline Dimension: 1023.78X578.37mmX63.8 (W × H * D) Brightness: 700cd 450cd Contrast: 3000:1 (Transmissive) Display Color: 16.7M Lamp Position: Lamp Type direct type light source : WLED Scanning Frequency: 60HZ Life: 50,000 (minimum) hours LCD splicing combinations: Any rows × columns random SD 46-inch LCD splicing screen Technical parameters: Model DWY-460S Panel Type South Korea imported brand new Samsung 46-inch DID LCD splicing Screen patchwork 6.7MM Backlight: CCFL Panel Size 46 inch Display Mode 16:9 Brightness 450cd / ㎡ (700cd / ㎡) Contrast Ratio 4500:1 Response Time 4.5ms Physical resolution 1366 × 768 resolution of 1920 × 1080 or curtain to compatible with 1080 lines of resolution pixel size 0.531mm (W) × 0.531mm (H) display 1.07 billion colors Viewing angle (left / down) 180 ° / 180 ° (full angle) Video PAL / NTSC life of 60,000 to 80,000 hours Dimensions 1025.7 mm × 579.8mm × 128.1mm (W × H × D) Display Area 1018.4 (W) mm × 572.5 (H) mm Field frequency 50Hz, 60Hz, 70Hz 55 inch LCD splicing screen technology parameters: DWY-550S panel parameters type of South Korean imports of Samsung DID LCD panel patchwork 5.5MM Backlight: LED backlight Diagonal 55 "physical resolution 1920X1080 pixels 0.63 (H) × 0.63 (V) Aspect Ratio 16:9 Contrast Ratio 3500:1 Brightness 450 cd/m2 700 cd/m2 Viewing Angle 178 ° (H) / 178 ° (V) Color 16.7M Response time 8ms Input signal PC Digital Signal System: DVI-D24-pin × 1 PC Analog: mini D-sub15-pin × 1 Video: BNCX2 RS- 232C D-sub9 pin × 1 control RS232 control system input / output RS232 wireless remote control the mechanical parameters of the screen size display area 1215.3mm x 686.1mm 1209.6mm x680.4mm physical thickness ≤ 120mm bilateral patchwork patchwork patchwork 5.3mm 5.5mm Optical 60-inch LCD splicing screen ultra-narrow frame (width between adjacent two monitors only 6.5 mm) 60 inches (diagonal: 1524mm) big screen. direct type LED backlight, than traditional cold cathode fluorescent backlight more uniform brightness. TV wall connection, a picture can be expanded to a maximum of 25 units on the display (5 × 5 connections) Horizontal / Vertical display 7 × 24 hours of continuous work. 60-inch LCD splicing screen-related parameters: Product Type 60-inch LCD splicing screen size 60 inches Screen ratio of 16:9 (widescreen) Best resolution 1366 × 768 Backlight type LED backlight display parameters Brightness 700cd / ㎡ Contrast Ratio 2400:1 static colors 16,770,000 colors displayed port parameters input port D- Sub (VGA), HDMI, BNC, DVI function parameters speakers built-in speakers (2 × 10W) ??Appearance parameters Body Color Black Material Ultra Narrow splicing screen, almost seamless Dimensions 1335.9 × 149.3 × 754.2mm Weight 44kg Other parameters Power Performance 100-240V ,50-60Hz Maximum Power 480W This phenomenon is, we often say that the mouse drift. general surface acoustic wave screen with this phenomenon, which is due four weeks above the edge of the sound reflective stripes accumulated a lot of dust or scale, affecting the transmission of acoustic signals caused Please use the above method to four weeks to wipe clean, pay attention to when cleaning the touch screen control card power supply is disconnected. touch kiosk why sometimes the response time will be very long? There may be stuck on the touch kiosk with moving water droplets, water droplets affect the operation of touch one machine, use a soft, dry cloth. Why touch the mouse moves only in a small area or touch allowed? usually in the first install the driver will happen, run the touch screen calibration procedure in changing the display resolution must also be run after the touch screen calibration procedure. connected to an external power monitor off, press the power reset switch after the cabinet after the host why not start? Please Check the cabinet power outlet power cord is plugged in tight; same token, the host can start properly, the display does not appear, please check the outlet plug can be.